×

static deflection meaning in Chinese

静变位
静电场偏向
静荷载挠度
静力负荷挠度
静态偏差
静态压缩量
静载挠度
静载弯曲

Examples

  1. Method for measurement of static deflection of power presses
    机动压力机的静载挠度的测量方法
  2. Spring static deflection
    弹簧静挠度
  3. Glass fibre reinfroced corrugated or ribbed polyester sheets . static deflection tests under distributed load
    玻璃纤维增强聚酯波形板或加肋板.分布荷载静力弯曲试验
  4. After contrasting and analyzing the main design parameters " test methods of laboratory and field outside , it sets up the correlativities between the field bearing plate modulus and other parameters such as design dynamic modulus , benkleman bean static deflection , field cbr value , consistency and density . by means of laboratory experiment , it assays the influence of the consistency on laboratory bearing plate modulus and laboratory cbr values , and establishes the relationships between laboratory and field values . combined with the project , a more logical sub - grade quality test standard is put forward
    通过对路基现场检测不同方法的对比分析,建立了设计动模量、贝克曼梁静弯沉、现场cbr 、稠度和压实度与现场承载板模量的关系;通过室内试验,分析了稠度对室内承载板、室内cbr的影响,并建立了室内外模量间的关系;在此基础上,结合工程实际,对不同检测方法进行了评价,提出了较为合理的路基施工质量检测标准。
  5. The experiment was performed at the accelerator mass spectrometer ( ams ) beam line on hi - 13 tandem accelerator of ciae using the 64cu off - line rnb , so the beam can be analysed and identified by static deflection technique of ams . limited by the deflection capacity of the electrostatic analyser of ams , the maximum incident energy of 64cu beam had to be restricted to 80 mev in the coulex experiment of 64cu off - line rnb
    实验是在中国原子能科学研究院hil串列加速器加速器质谱( ams )管道上完成的,利用ams静电偏转技术来分析鉴别束流成份,但是受ams管道静电分析器偏转能力的限制,在离线放射性核束中最高只能使用入射能量为80mev的的cu束。

Related Words

  1. diaphragm deflection
  2. static population
  3. static electrometer
  4. static set
  5. static heterophoria
  6. static sensitinity
  7. static gravity
  8. static reserve
  9. static energy
  10. static opening
  11. static decomposition
  12. static decoupling
  13. static defoaming time
  14. static deformation
PC Version

Copyright © 2018 WordTech Co.